• Quick and easy to use
• Fast drying
• Fights rust

Plastikote Primers offer ultimate metal protection with a non-sanding formula for areas of moderate corrosion. For protection from severe corrosion use Plasti-kote Zinc Primer which actually fuses to the surface it is applied to.
 

DRYING TIME:

Allow to dry for 10 minutes between coats. Touch-dry in 20 - 40 minutes. Thoroughly dry in 2 - 4 hours.

COVERAGE:

Approximately 2.23m˛

APPLICATION TIPS:

Use only in well ventilated areas.

Ensure surface is clean and dry.

Three thin coats are recommended rather than one heavy coat.

Before applying spray on an inconspicuous area to ensure compatibility and suitability.

Special precautions should be taken during preparation of pre-1960 paint surfaces as they may contain harmful lead. For further advice please telephone Plasti-kote on 01223 836400.
 

0.00

Product Barcode: 0071915206702